Tuesday, September 10, 2019

Study of chemical vapor deposition CVD grown transparent conducting Dissertation

Study of chemical vapor deposition CVD grown transparent conducting oxides (TCO) - Dissertation Example The results show that samples AGC-U and TEC 8 are both fit for use as semiconductor materials though the electrical conductivity of TEC 8 is better than that for AGC-U. Moreover when it comes to samples 198-219 the electrical properties (such as sheet resistance, mobility, resistivity and carrier concentration) tend to change as the doping levels are varied. The best electrical properties can be attributed to Sample 200 (with a doping level of 0.6 M) as it has the highest conductivity. It was also found out that fluorine doped samples had higher resistivity and that the mean transmission and mean reflection change as the doping levels of fluorine are changed. The mean transmission varies between 46.95% and 63.21% while the mean reflection varies between 2.21% and 4.25%. Sample 198 had the highest transmission while Sample 213 had the lowest transmission and reflection. It was also found out that the peak position did not vary as the levels of fluorine doping were changed. However the intensity (Lin count) tends to change as fluorine doping levels are changed. Sample 213 (0 M) had the lowest intensities while Sample 198 (0.4 M) had the highest peak.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.